Products

Kompletní nabídka sortimentu značky ISOVER v České republice zahrnuje produkty z čedičové i skelné vlny, extrudovaného a expandovaného polystyrenu a doplňky pro systémová izolační řešení pro izolace podlah, příček, stěn, fasád, stropů, podhledů, plochých i šikmých střech či potrubních rozvodů.

Více o našich aplikacích

Apply filters
Filter
Sort by:

Panel Solr Search Content Block

Filter your result Reset Apply filters
Filter
99 results

ISOVER LAM 30

Lambda λD = 0,040 (W·m-1·K-1)

These large-format lamellas are made of ISOVER mineral stone wool with perpendicular fibres. The production is based on defibring method of the minerals composition melt and additional additives and ingredients. The mineral fibres produced are processed into the final lamella´s shape on the production line. The entire fibre surface is hydrophobic. The lamellas in the construction have to be protected suitably (vapour-proof foil, waterproofing, flat roof bearing layer, etc.)

ISOVER LAM 50

Lambda λD = 0,041 (W·m-1·K-1)

These large-format lamellas are made of ISOVER mineral stone wool with perpendicular fibres. The production is based on defibring method of the minerals composition melt and additional additives and ingredients. The mineral fibres produced are processed into the final lamella´s shape on the production line. The entire fibre surface is hydrophobic. The lamellas in the construction have to be protected suitably (vapour-proof foil, waterproofing, flat roof bearing layer, etc.)

ISOVER LAM 70

Lambda λD = 0,042 (W·m-1·K-1)

These large-format lamellas are made of ISOVER mineral stone wool with perpendicular fibres. The production is based on defibring method of the minerals composition melt and additional additives and ingredients. The mineral fibres produced are processed into the final lamella´s shape on the production line. The entire fibre surface is hydrophobic. The lamellas in the construction have to be protected suitably (vapour-proof foil, waterproofing, flat roof bearing layer, etc.)

ISOVER HygroWick ®

Insulating sleeve suitable for cold or dual distribution in the temperature range 0 to 250 ° C, especially for cases where there is also a requirement for non-flammability of insulation (protected escape routes, etc.). Application for short-term temperatures below 0 ° C only after consultation with the manufacturer. The insulation thickness must be at least such that the surface temperature of the cladding is higher than the dew point temperature.

ISOVER Vario Xtrapatch

ISOVER Vario® XtraPatch is a self-adhesive tape used to attach the ISOVER Vario® XtraSafe to the backing with a „zip” system. It is used especially for metal plasterboard frames. The package contains ready-to-use parts of 60 mm. The tape can be applied at temperatures ≥ -10°C (application temperatur

CLIMAVER ® Deco

CLIMAVER® Deco is a suitable solution, for example, for forced ventilation systems in residential and non-residential premises. It always depends on the assessment of the specific character of the building and the proposed HVAC system. The installation of this type of piping is suitable for types of

CLIMAVER ® Neto

CLIMAVER® Neto is a suitable solution, for example, for forced ventilation systems in residential and non-residential premises. It always depends on the assessment of the specific character of the building and the proposed HVAC system. The installation of this type of piping is suitable for types of buildings where the emphasis is on acoustics: cinemas, theaters, educational facilities, hospitals, office buildings.

CLIMAVER ® Plus

CLIMAVER® is a self-supporting air duct for the distribution of treated air for heating, ventilation and air conditioning. The CLIMAVER® Plus R and A2 Plus system has been designed to provide excellent thermal properties and a high level of airtightness. This makes the system energy efficient. The core of the panel is made of glass wool with a thickness of 25 mm. The outer and inner side of the panel is covered with aluminum foil reinforced with glass fibers. The system is designed to meet the reaction to fire class B-s1, d0 and A2-s1, d0. Thanks to the speed of installation of already pre-insulated pipes, you will save time and thus excess costs in the workplace.

ISOVER Top V Final

Lambda λD = 0,040 (W·m-1·K-1)

Facade mineral insulation with perpendicular fiber and final spray. It has chamfered edges around the perimeter of the front side of the board. It is designed to insulate interior ceilings and walls.