Floor insulation

Promyšlená izolace podlahy tvoří nedílnou součást našeho domu. Pokud toto zanedbáme již v projektu, velice těžko naši chybu napravíme. Oprava izolací těchto prostor není tak jednoduchá, jako oprava izolace stěny. U podlahy jsme limitovaní její hladinou a navazujícími dveřmi. Proto je velmi důležité provést izolaci podlahy a stropu hned napoprvé a na jedničku.

VĂ­ce o aplikaci

Apply filters
Filter
Sort by:

Panel Solr Search Content Block

Filter your result Reset Apply filters
Filter
14 results

ISOVER EPS Rigifloor 4000

<p>Lambda λ = 0,044</p>Isover EPS RigiFloor is a special type of elastified EPS boards with minimum dynamic rigidity. Combined with a load distributing board, it enables construction of floors with a high capacity to mitigate the footstep effect. EPS Isover insulation boards are made using the latest technologies without any contents of CFCs and HCFCs (known as freons). The modern technology ensures constant quality and minimum power demands of production, which provides the boards with the excellent price/output ratio. All EPS Isover boards are made in fire-selfextinguishing design with increased fire safety.

ISOVER EPS Rigifloor 5000

<p>Lambda λ = 0,039</p>Isover EPS RigiFloor is a special type of elastified EPS boards with minimum dynamic rigidity. Combined with a load distributing board, it enables construction of floors with a high capacity to mitigate the footstep effect. EPS Isover insulation boards are made using the latest technologies without any contents of CFCs and HCFCs (known as freons). The modern technology ensures constant quality and minimum power demands of production, which provides the boards with the excellent price/output ratio. All EPS Isover boards are made in fire-selfextinguishing design with increased fire safety.

ISOVER Kříž EPS

<p>Lambda λ = 0,035</p>Insulating load-bearing cross made of EPS for the Isover STEPcross system composition consisting of two 500 x 100 mm parts. Consumption is 0.75 pcs / m2. We supply the system composition only as a set (for mineral insulation and vapor barrier, we supply the appropriate number of EPS crosses and EPS beams).

ISOVER N

<p>Lambda λ = 0,035</p>Insulating slabs made of ISOVER mineral wool. The production is based
on defibring method of the minerals composition melt and additional
additives and ingredients. The mineral fibres produced are processed
into the final slab shape on the production line. The entire fibre surface is
hydrophobic. The slabs in the construction have to be protected suitably
(separating PE foil).

ISOVER N/PP

<p>Lambda λ = 0,035</p>ISOVER N/PP insulating strips ensure besides the expansion joint profile
formation a flexible disconnection of the floor construction from the
vertical walls and ceiling construction vents. They reduce side transmission
of the impact sound and form an integral part of the floating floor assembly
solution.

ISOVER T-N

<p>Lambda λ = 0,036</p>Insulating slabs made of ISOVER mineral wool. The production is based on
defibring method of the minerals composition melt and additional additives
and ingredients. The mineral fibres produced are processed into the final
slab shape on the production line. The entire fibre surface is hydrophobic.
The slabs should be protected in the heavy floating floor construction by
a separating PE foil when the “wet process” is used.

ISOVER T-P

<p>Lambda λ = 0,037</p>Insulating slabs made of ISOVER mineral wool. The production is based on
defibring method of the minerals composition melt and additional additives
and ingredients. The mineral fibres produced are processed into the final
slab shape on the production line. The entire fibre surface is hydrophobic.
The slabs in the construction have to be protected suitably (vapour-proof
foil, layers of the floor construction, etc.)

ISOVER TDPT

<p>Lambda λ = 0,033</p>Insulation slabs made of ISOVER fibreglass wool. The production is based on defibration of melt of glass and other additives and ingredients. Produced mineral fibres are then shaped into slabs on the production line. The entire fibre surface is hydrophobic. Slabs in construction have to be protected suitably (steam protection foil, other layers of floor construction).

ISOVER EPS Grey 100

<p>Lambda λ = 0,031</p>Use for floors: Graphite insulation boards EPS with increased insulation effect for heavy and light floating floors without impact attenuation requirements. They are designed for structures with common compressive loads and small deformation (apartments, offices, classrooms ...). Permanent load capacity max. 2000 kg / m2 at def. <2% with the possibility of linear interpolation for smaller loads. If impact attenuation is required, it is necessary to perform multi-layer insulation (combine hard and soft insulation boards). The boards are suitable for insulation layers of large thicknesses for energy-efficient houses. Upon agreement, it can be delivered in other thicknesses and dimensions. Minimum delivery quantity - 4 m3.

Application for roofs: New graphite insulation boards with increased insulation effect for structures with common pressure load requirements (floors, roofs ...). Permanent load capacity in pressure max. 2000 kg / m2 at def. <2% with the possibility of linear interpolation for smaller loads. Application and storage at temperature max. 70 ° C. Upon agreement, it can be delivered in other thicknesses and dimensions.

ISOVER Vario Doublefit

ISOVER Vario® DoubleFit is a two-component, solvent-free, tear-resistant sealant suitable for making all airtight connections on parts of buildings, e.g., gable walls, purlins, windows, doors. It is applied in thickness 7-8 mm to ensure a permanent airtight connection of the steam brake and perimete

ISOVER Vario KB1

ISOVER Vario® KB 1 is a wide adhesive tape with an unusually high adhesive strength. It is developed especially for safe airtight gluing of Vario® vapor barrier foil overlaps.

ISOVER Vario Multitape SL

ISOVER Vario® MultiTape SL is a one-sided, elastic, highly flexible adhesive tape for airtight gluing of foils such as the Vario® vapor barrier foil. It is suitable for corners, joints, and passages through the roof and for solving the connection of the steam brake to rafters, purlins, roof windows,

ISOVER Vario KM Duplex UV

ISOVER Vario® KM Duplex UV vapour barrier was developed as a polyamide based foil, which, apart from being a vapour barrier, also has a variable equivalent diffusion sd thickness, providing for the control of the construction moisture.