Isover T-N
Isover T-N plates are designed for improving footfall and air sound insulation of heavy floating floors with concrete reinforced slab or with anhydrite. It is delivered on pallets (packages on a pallet).
Isover T-N plates are designed for improving footfall and air sound insulation of heavy floating floors with concrete reinforced slab or with anhydrite. It is delivered on pallets (packages on a pallet).
Product characteristics
Insulating slabs made of Isover mineral wool. The production is based on defibring method of the minerals composition melt and additional additives and ingredients. The mineral fibres produced are processed into the final slab shape on the production line. The entire fibre surface is hydrophobic. The slabs should be protected in the heavy floating floor construction by a separating PE foil when the “wet process” is used.
Usage
Isover T-N boards are suitable for improving footfall and air sound insulation of heavy floating floors, especially anhydrite floors, or for spaces with increased useful load (apartment buildings, offices, classrooms, lecture halls). The payload must not exceed 4 kN/m2.
Packaging, transport, storage
Isover T-N insulation boards are packed in PE film up to a maximum package height of 0.5 m. The boards must be transported in covered means of transport under conditions that exclude their wetting or other deterioration. They are stored in covered areas lying down to a maximum layer height of 2 m.
Key Facts
- Very good thermal insulation performance.
- Fire resistance.
- Excellent acoustic properties in terms of noise absorption.
- Low vapour resistance – good water vapour penetrability.
- Environmental impacts of the product documented
in the Environmental Product Declaration (EPD). - Hydrophobic treatment.
- Designed for long-term performance when installed
and used according to manufacturer instructions. - Resistant to wood-destroying pests, rodents, and insects.
- Easy workability – can be cut, drilled into, etc.
Varianty produktu
| Thickness (mm) | Packaging (m2) | Palette (m2) | Transport packaging (m3) | Length x Width (mm) | Dynamická tuhost MN·m-3 | Kročejový útlum ΔLw (dB) | Thermal resistance RD (m2·K·W-1) |
|---|---|---|---|---|---|---|---|
| Thickness (mm)25 | Packaging (m2)5,76 | Palette (m2)69,12 | Transport packaging (m3)0,140 | Length x Width (mm)1 200 × 600 | Dynamická tuhost MN·m-325 | Kročejový útlum ΔLw (dB)24 | Thermal resistance RD (m2·K·W-1)0,65 |
| Thickness (mm)30 | Packaging (m2)5,04 | Palette (m2)60,48 | Transport packaging (m3)0,15 | Length x Width (mm)1 200 × 600 | Dynamická tuhost MN·m-321 | Kročejový útlum ΔLw (dB)25 | Thermal resistance RD (m2·K·W-1)0,80 |
| Thickness (mm)40 | Packaging (m2)4,32 | Palette (m2)43,2 | Transport packaging (m3)0,17 | Length x Width (mm)1 200 × 600 | Dynamická tuhost MN·m-320 | Kročejový útlum ΔLw (dB)26 | Thermal resistance RD (m2·K·W-1)1,10 |
| Thickness (mm)50 | Packaging (m2)2,88 | Palette (m2)34,56 | Transport packaging (m3)0,140 | Length x Width (mm)1 200 × 600 | Dynamická tuhost MN·m-315 | Kročejový útlum ΔLw (dB)28 | Thermal resistance RD (m2·K·W-1)1,35 |
The weighted reduction in the footfall sound level ΔLw was calculated on a concrete monolithic ceiling tl. 120 mm. With spreading plate made of anhydrite, thickness 40 mm.
Dokumenty
Related products and solutions
