Products

Lambda λ_D = 0,035 (W·m^-1·K^-1)

Insulation slabs made of ISOVER fibreglass wool. The production is based on defibration of melt of glass and other additives and ingredients. Produced mineral fibres are then shaped into slabs on the production line. Fibres are made water-repellent on their entire surface. Slabs in construction have to be protected suitably (steam protection foil, protection from dust settling, other layers of construction).

Black single-sided adhesive tape with high UV resistance and excellent adhesive properties. Suitable for gluing joints of boards laminated with black non-woven fiberglass. It can also be used outdoors.

ISOVER DK are two-slope wedges made of stone insulation and creating a spatial slope of single-skin flat roofs with high requirements for fire safety.

Lambda λ_D = 0,040 (W·m^-1·K^-1)

These large-format lamellas are made of ISOVER mineral stone wool with perpendicular fibres. The production is based on defibring method of the minerals composition melt and additional additives and ingredients. The mineral fibres produced are processed into the final lamella´s shape on the production line. The entire fibre surface is hydrophobic. The lamellas in the construction have to be protected suitably (vapour-proof foil, waterproofing, flat roof bearing layer, etc.)

Lambda λ_D = 0,041 (W·m^-1·K^-1)

These large-format lamellas are made of ISOVER mineral stone wool with perpendicular fibres. The production is based on defibring method of the minerals composition melt and additional additives and ingredients. The mineral fibres produced are processed into the final lamella´s shape on the production line. The entire fibre surface is hydrophobic. The lamellas in the construction have to be protected suitably (vapour-proof foil, waterproofing, flat roof bearing layer, etc.)

Lambda λ_D = 0,042 (W·m^-1·K^-1)

These large-format lamellas are made of ISOVER mineral stone wool with perpendicular fibres. The production is based on defibring method of the minerals composition melt and additional additives and ingredients. The mineral fibres produced are processed into the final lamella´s shape on the production line. The entire fibre surface is hydrophobic. The lamellas in the construction have to be protected suitably (vapour-proof foil, waterproofing, flat roof bearing layer, etc.)

Insulating sleeve suitable for cold or dual distribution in the temperature range 0 to 250 ° C, especially for cases where there is also a requirement for non-flammability of insulation (protected escape routes, etc.). Application for short-term temperatures below 0 ° C only after consultation with the manufacturer. The insulation thickness must be at least such that the surface temperature of the cladding is higher than the dew point temperature.

CLIMAVER® self-supporting duct system for air-conditioning, ventilation and heating systems

CLIMAVER self-supporting ducts for outdoor use

ISOVER Vario® XtraPatch is a self-adhesive tape used to attach the ISOVER Vario® XtraSafe to the backing with a „zip” system. It is used especially for metal plasterboard frames. The package contains ready-to-use parts of 60 mm. The tape can be applied at temperatures ≥ -10°C (application temperature -30°C to +100°C) and the recommended maximum spacing between the parts is 40 cm.

Lambda λ_D = 0,039 (W·m^-1·K^-1)

Compressive strength = 100kPa

ISOVER XH insulating slabs are packed on the pallets in height up to 1.3 m.

CLIMAVER^® Deco is a suitable solution, for example, for forced ventilation systems in residential and non-residential premises. It always depends on the assessment of the specific character of the building and the proposed HVAC system. The installation of this type of piping is suitable for types of

CLIMAVER® Neto is a suitable solution, for example, for forced ventilation systems in residential and non-residential premises. It always depends on the assessment of the specific character of the building and the proposed HVAC system. The installation of this type of piping is suitable for types of

CLIMAVER® is a self-supporting air duct for the distribution of treated air for heating, ventilation and air conditioning. The CLIMAVER® Plus R and A2 Plus system has been designed to provide excellent thermal properties and a high level of airtightness. This makes the system energy efficient. The c

Lambda λ_D = 0,040 (W·m^-1·K^-1)

Facade mineral insulation with perpendicular fiber and final spray. It has chamfered edges around the perimeter of the front side of the board. It is designed to insulate interior ceilings and walls.

Black AL tape, tape width is 90 mm, 100 m in one package.

Square boards corners are joint with fire screws equal to twice the length of the insulation thickness.