Stone wool

TECH Wired Mat MT 3.1

TECH Wired Mat MT mesh mats are suitable as thermal or acoustic insulation of pipes, technological devices and boilers with high temperature loads. It is supplied in the variant of galvanized mesh and galvanized sewing wire. After consultation with customer service, it is possible to deliver a mat sewn with stainless steel wire on galvanized or stainless steel mesh, or with an ALU finish.
Read more
Read less

Product characteristics

TECH Wired Mat MT 3.1 is a stone wool mat with wire mesh sewn on one side. It is delivered as standard in the variant of galvanized mesh and galvanized sewing wire. on request, for temperatures higher than 400 °C and/or for stainless steel surfaces, it is possible to offer a mat sewn with stainless steel wire on galvanized mesh (designation TECH Wired Mat MT 3.1 X) or a mat sewn with stainless wire on stainless steel mesh (designation TECH Wired Mat MT 3.1 X-X) all variants according to ČSN EN 10223-2.

Usage

The mesh mat TECH Wired Mat MT 3.1 is suitable as thermal and/or acoustic insulation of pipelines and technological devices.

Although the fibers of the insulation are hydrophobized, the mat must be properly protected in the construction against moisture (outdoors from weather effects) and possible mechanical damage.

The highest operating temperature in the sense of the ČSN EN 14706 standard is 560 °C. In the part of the insulation that is exposed to temperatures higher than 150 °C, a one-time evaporation of the binder occurs. In areas with a lower temperature, this phenomenon does not occur.

Packaging, transport, storage

The product is delivered palletized. The material must be transported and stored under conditions that exclude its wetting or other deterioration.

Key Facts

  • AS quality - suitable for insulating stainless steel surfaces.

Product variations

Articles information
Thickness (mm) Rozměry (mm) Packaging (m2) Rolí v balíku (ks) Balíků na paletě (ks) Množství na paletě (m2)
Thickness (mm)50 Rozměry (mm)1 000 × 5 000 Packaging (m2)5 Rolí v balíku (ks)1 Balíků na paletě (ks)21 Množství na paletě (m2)105
Thickness (mm)60 Rozměry (mm)1 000 × 5 000 Packaging (m2)5 Rolí v balíku (ks)1 Balíků na paletě (ks)21 Množství na paletě (m2)105
Thickness (mm)80 Rozměry (mm)1 000 × 4 000 Packaging (m2)4 Rolí v balíku (ks)1 Balíků na paletě (ks)21 Množství na paletě (m2)84
Thickness (mm)100 Rozměry (mm)1 000 × 2 500 Packaging (m2)2,5 Rolí v balíku (ks)1 Balíků na paletě (ks)21 Množství na paletě (m2)52,5
Notes

The thickness is measured under a load of 50 Pa.

Documents

Select all
Katalogy a prospekty
1 datasheet related with the product
1 datasheet related with the product
Katalog Pasivní protipožární ochrana staveb II
Technické listy
1 datasheet related with the product
1 datasheet related with the product
TechnickĂ˝ list 2023 TECH Wired Mat MT 3.1
Prohlášení o vlastnostech
2 datasheets related with the product
2 datasheets related with the product
Leistungserklärung 2019 Orstech DP 65 / Orstech DP 65 ALU (TECH Wired Mat MT 3.1)
Prohlášení o vlastnostech 2019 Orstech DP 65 / Orstech DP 65 ALU (TECH Wired Mat MT 3.1)
Ostatní technické dokumenty
2 datasheets related with the product
2 datasheets related with the product
Fire Resistant Duct-Insulation - Design tables
VZT potrubĂ­ - dimenzaÄŤnĂ­ tabulky

Mohlo by vás zajímat