Isover SD
Drop plates. Sizes according to project requirements. Falling system made of mineral fibers usually with a slope of 2%, but it is possible to supply up to a slope of 15%. More information will be provided by the manufacturer.
Read more
Read less
Product
Isover SD
Drop plates. Sizes according to project requirements. Falling system made of mineral fibers usually with a slope of 2%, but it is possible to supply up to a slope of 15%. More information will be provided by the manufacturer.
Read more
Read less
Usage
Isover SD boards are suitable as a fall layer of single-skin flat roofs, which significantly improves the thermal technical parameters of the roof skin, minimally burdens the ceiling structure and, due to the dry process, shortens the installation time. It is most often produced with a 2% slope, but it is possible to make a slope tailored to a particular flat roof. Fall plates are used in intermediate layers, between 2 plates of thermal insulation.
Packaging, transport, storage
Products must be transported in covered means of transport under conditions that exclude their wetting or other deterioration. They are stored lying down in covered areas.
Key Facts
- Very good thermal insulation performance.
- Fire resistance.
- Excellent acoustic properties in terms of noise absorption.
- Low vapour resistance – good water vapour penetrability.
- Environmental impacts of the product documented
in the Environmental Product Declaration (EPD). - Hydrophobic treatment.
- Designed for long-term performance when installed
and used according to manufacturer instructions. - Resistant to wood-destroying pests, rodents and insects.
- Easy workability – can be cut, drilled into, etc.
Varianty produktu
| Thickness (mm) | Délka x šířka (mm) | Spád (%) |
|---|---|---|
| Thickness (mm)0 - 140 | Délka x šířka (mm)1200 × 1000 | Spád (%)0 - 14 |
Dokumenty
Related products and solutions
