U Protect Slab 4.0 Alu1

Product characteristics

The U Protect Slab 4.0 Alu1 board, with a black aluminum foil coating, is made of ULTIMATE stone wool.

Usage

U Protect Slab 4.0 Alu1 is certified as part of the ULTIMATE Protect fire protection system for fire-resistant pipes according to the ČSN EN 1366-1 standard (fire resistance 30, 45, 60, 90 and 120 minutes) and for heat and smoke evacuation (ZOKT ) according to the ČSN EN 1366-8 standard (fire resistance 60 minutes). Details are given in the system data sheet.

The board can also be used for other applications, it is especially suitable for insulating air conditioning pipes and technological equipment. The product is compressible and therefore not suitable for installation in places with mechanical stress.

Although the fibers of the insulation are hydrophobized, it is necessary to protect the board in a suitable way in the construction from moisture (in the exterior from weather effects) and possible mechanical damage. With a combination of high temperature and vibration loads, the manufacturer recommends considering the use of a board with a higher bulk density (min. 110 kg/m³), or a mat on a wire mesh.

The highest operating temperature in the sense of the ČSN EN 14706 standard is 400 °C. For a board with adhesive, the thickness of the insulation must be selected so that the temperature on the adhesive side does not exceed 100 °C. In the part of the insulation that is exposed to temperatures higher than 150 °C, a one-time evaporation of the binder occurs. In areas with a lower temperature, this phenomenon does not occur.

Packaging, transport, storage

The product is delivered as palletized. The material must be transported and stored under conditions that exclude its wetting or other deterioration.