Stone wool

Isover Top V Final

Phonic Insulation
Thermal insulation properties
Fire Resistant
<b>Lambda λ<sub>D</sub> = 0.040 W·m<sup>-1</sup>·K<sup>-1</sup><br>Tensile strength TR
30 kPa.</b><br>Facade mineral insulation with vertical fiber with final coating and bevelled edges around the perimeter on the face of the board, intended for insulation of interior ceilings and walls. The insulation is glued over the entire surface and does not need to be additionally anchored. Possible spray variants are white and concrete gray.
Read more
Read less
SVT Code
10417

Product characteristics

Insulating facade boards made of basalt mineral wool, the production of which is based on the method of spinning the melt of a mixture of rocks, recycled material and other ingredients. The formed mineral fibers are first processed in the production line into the shape of plates, and then the edges around the perimeter on the front side of the plate are adjusted by beveling 20 mm at an angle of 45 degrees. The fibers are hydrophobized over the entire surface and have a predominantly perpendicular orientation to the plane of the wall. Subsequently, white (RAL 9010) or gray (RAL 7032) paint is applied to the front surface of the board with a covering effect.

Usage

Boards with vertical fiber Isover Top V Final, have bevelled edges around the perimeter on the front side and are intended for ceiling and wall insulation. These boards are glued over the entire surface to a sufficiently flat and load-bearing surface. If necessary, it is mechanically anchored. Boards placed regularly next to each other for binding or cutting are able to hide minor unevenness of the substrate and create a three-dimensional boss effect. The surface coating of white or concrete gray paint is so opaque that it is sufficient for use in rooms such as an underground garage, technical room, basement. however, with a higher aesthetic or architectural requirement, it is necessary to apply an additional coating of facade or interior painting.

Packaging, transport, storage

Isover Top V Final boards are loosely packed on pallets. The material must be transported and stored under conditions that exclude its wetting or other deterioration. The material must be stored in a covered area.

Key Facts

  • The size of the plate 1200 Ă— 333 mm allows up to 50% faster application than with a normal lamella.
  • Surface spray with white or gray coverage.
  • Use without the need for subsequent surface treatment.
  • Possibility of application without anchoring.
  • Shorter implementation time compared to standard insulation systems.
  • Ability to hide minor unevenness of the base.
  • Creating a spatial boss effect.
  • High tensile strength (can be glued to ceilings).
  • Very good thermal insulation capabilities.
  • High fire resistance.
  • Excellent acoustic properties in terms of sound absorption.
  • Low diffusion resistance - easy permeability for water vapor.
  • Ecological and hygienic safety.
  • Water repellency - the material is hydrophobized.
  • Long life.
  • Resistance against wood-destroying pests, rodents and insects.

Product variations

Articles information
Thickness (mm) Length x Width (mm) Balení (ks) Transport packaging (m3) Palette (m2) Thermal resistance RD (m2·K·W-1)
Thickness (mm)50* Length x Width (mm)1 200 x 333 Balení (ks)120 Transport packaging (m3)2,400 Palette (m2)48,00 Thermal resistance RD (m2·K·W-1)1,25
Thickness (mm)60* Length x Width (mm)1 200 x 333 Balení (ks)99 Transport packaging (m3)2,376 Palette (m2)39,60 Thermal resistance RD (m2·K·W-1)1,50
Thickness (mm)80* Length x Width (mm)1 200 x 333 Balení (ks)75 Transport packaging (m3)2,400 Palette (m2)30,00 Thermal resistance RD (m2·K·W-1)2,00
Thickness (mm)100* Length x Width (mm)1 200 x 333 Balení (ks)60 Transport packaging (m3)2,400 Palette (m2)24,00 Thermal resistance RD (m2·K·W-1)2,50
Thickness (mm)120* Length x Width (mm)1 200 x 333 Balení (ks)48 Transport packaging (m3)2,304 Palette (m2)19,20 Thermal resistance RD (m2·K·W-1)3,00
Thickness (mm)140* Length x Width (mm)1 200 x 333 Balení (ks)42 Transport packaging (m3)2,352 Palette (m2)16,80 Thermal resistance RD (m2·K·W-1)3,50
Thickness (mm)150* Length x Width (mm)1 200 x 333 Balení (ks)39 Transport packaging (m3)2,340 Palette (m2)15,60 Thermal resistance RD (m2·K·W-1)3,75
Thickness (mm)160* Length x Width (mm)1 200 x 333 Balení (ks)36 Transport packaging (m3)2,304 Palette (m2)14,40 Thermal resistance RD (m2·K·W-1)4,00
Thickness (mm)180* Length x Width (mm)1 200 x 333 Balení (ks)33 Transport packaging (m3)2,376 Palette (m2)13,20 Thermal resistance RD (m2·K·W-1)4,50
Thickness (mm)200* Length x Width (mm)1 200 x 333 Balení (ks)30 Transport packaging (m3)2,400 Palette (m2)12,00 Thermal resistance RD (m2·K·W-1)5,00
Notes

* Delivery conditions must be consulted with the manufacturer.

Documents

Select all
Katalogy a prospekty
2 datasheets related with the product
2 datasheets related with the product
Katalogy a prospekty
Katalog fasád - Fasádní zateplovací systémy
Katalogy a prospekty
Katalog Příčky, předstěny a podhledy
Technické listy
2 datasheets related with the product
2 datasheets related with the product
Technické listy, EN
Technical Data Sheet 2023 Isover Top V Final
Technické listy, CZ
TechnickĂ˝ list 2023 Isover Top V Final
Prohlášení o vlastnostech
2 datasheets related with the product
2 datasheets related with the product
Prohlášení o vlastnostech, POV EN
Declaration of Performance 2023 Isover TOP V Final
Prohlášení o vlastnostech, POV CZ
Prohlášení o vlastnostech 2023 Isover TOP V Final
Ostatní technické dokumenty
1 datasheet related with the product
1 datasheet related with the product
Ostatní technické dokumenty
Osvědčení o stálosti vlastností 2023 Fasádní výrobky