Orstech DP 80

Product characteristics
Orstech DP 80 is a stone wool mat with wire mesh sewn on one side. It is delivered as standard in the variant of galvanized mesh and galvanized sewing wire. On request, for temperatures above 400 °C and/or for stainless steel surfaces, it is possible to offer a mat sewn with stainless steel wire on galvanized mesh (designation Orstech DP 80 X) or a mat sewn with stainless wire on stainless mesh (designation Orstech DP 80 X-X); all variants according to AGI Q 132 and ČSN EN 10223-2.
Usage
The mesh mat Orstech DP 80 is suitable as thermal and/or acoustic insulation of pipes, technological equipment, boilers, furnaces and flues with high temperature load.
Although the fibers of the insulation are hydrophobized, the mat must be properly protected in the construction against moisture (outdoors from weather effects) and possible mechanical damage.
The highest operating temperature in the sense of the ČSN EN 14706 standard is 640 °C. In the part of the insulation that is exposed to temperatures higher than 150 °C, a one-time evaporation of the binder occurs. In areas with a lower temperature, this phenomenon does not occur.
Packaging, transport, storage
The product is delivered as loose rolls or as palletized. The material must be transported and stored under conditions that exclude its wetting or other deterioration.
Key Facts
- Quality certificate according to VDI 2055 – annual regular supervision by the FIW Munich testing center since 2000.
- Classification of insulating material according to AGI Q 132: 10.01.02.40.08.
- Very good thermal insulation properties.
- High temperature resistance (up to the highest operating temperature of 640 °C).
- AS quality - suitable for insulating stainless steel surfaces.
Product variations
Thickness (mm) | Rozměry (mm) | Balení (m2) | Rolí v balíku (ks) | Balíků na paletě (ks) | Množství na paletě (m2) |
---|---|---|---|---|---|
Thickness (mm)40 | Rozměry (mm)2 × 500 × 5 000 | Balení (m2)5 | Rolí v balíku (ks)2 | Balíků na paletě (ks)21 | Množství na paletě (m2)105 |
Thickness (mm)50 | Rozměry (mm)2 × 500 × 4 000 | Balení (m2)4 | Rolí v balíku (ks)2 | Balíků na paletě (ks)21 | Množství na paletě (m2)84 |
Thickness (mm)60 | Rozměry (mm)2 × 500 × 3 000 | Balení (m2)3 | Rolí v balíku (ks)2 | Balíků na paletě (ks)21 | Množství na paletě (m2)63 |
Thickness (mm)70* | Rozměry (mm)2 × 500 × 3 000 | Balení (m2)3 | Rolí v balíku (ks)2 | Balíků na paletě (ks)18 | Množství na paletě (m2)54 |
Thickness (mm)80 | Rozměry (mm)2 × 500 × 2 500 | Balení (m2)2,5 | Rolí v balíku (ks)2 | Balíků na paletě (ks)21 | Množství na paletě (m2)52,5 |
Thickness (mm)90* | Rozměry (mm)2 × 500 × 2 000 | Balení (m2)2 | Rolí v balíku (ks)2 | Balíků na paletě (ks)21 | Množství na paletě (m2)42 |
Thickness (mm)100 | Rozměry (mm)2 × 500 × 2 000 | Balení (m2)2 | Rolí v balíku (ks)2 | Balíků na paletě (ks)21 | Množství na paletě (m2)42 |
Thickness (mm)120* | Rozměry (mm)2 × 500 × 2 000 | Balení (m2)2 | Rolí v balíku (ks)2 | Balíků na paletě (ks)18 | Množství na paletě (m2)36 |
* Delivery terms must be consulted with customer service.
ALU treatment (inserted aluminum foil under the mesh) can be supplied on request.
Upon agreement with the manufacturer, it can also be supplied in a width of 1,000 mm (does not apply to mats with stainless steel mesh).
The thickness is measured under a load of 50 Pa. Therefore, during installation, the insulation thickness may be greater than the nominal installed thickness. Please take this into account when pre-ordering sheet metal cladding.
Documents